I purchased a wood stove in St-Marcellin and accepted the generous assistance of
Serge Bellier to bring it back to Gamone in his large utility vehicle. We moved the stove into its intended position, which has made it possible to verify that the smoke pipe—which will emerge vertically from the top of the stove—is perfectly aligned with the hole I made in the ceiling.
This photo shows the neat solution imagined by Serge for holding in place a pair of boards around the future pipe. This will enable me, working from the upper floor, to fill up with plaster the space around the jagged hole in the ceiling.
In the floor beneath and behind the stove, some bare concrete needs to be covered in ceramic tiles. To the left, a final task has to be carried out in the vicinity of the stove, which is too close to the Placoplatre wall. I intend to remove a rectangular piece of this wall and replace it by slabs of the white lightweight material known in English as ACC (autoclaved cellular concrete,
béton cellulaire in French, brand name Siporex), which is fire-resistant.
ليست هناك تعليقات:
إرسال تعليق